Woodpecker® Arundel Premium Grade Floors
Woodpecker Arundel is a premium grade floor using only the highest quality material in both native and exotic species. The difference between Arundel and other floors is the specification of the materials used.
The birch ply core is FSC certified, it is also WBP* (Water Boiled Proof) and CP/CP** certified. FSC is also available for all the top layers at an additional cost.
Arundel floors have a 22m thickness with a 7mm wear layer on a 15mm birch ply core as above. Each plank is 180mm in width and up to 2000mm long***. Each board has a tongue and groove joint and due to the stability of the boards it is possible to nail, stick down, or float the floor depending on the requirements of the installation.
You can choose whether to have the floor with or without bevels, unfinished or pre finished with either a UV cured lacquer or natural oil to give you the look and character that you require.
*WBP means that the glue has been tested at temperatures of 100° plus for 72 hours without failing.
**CP/CP is a standard that does not permit any voids between the layers of the ply laminations, which means that all knot holes are either removed or filled to ensure even transfer of heat through the board, making this product uniquely suitable for underfloor heating.
***This specification does not apply to Arundel Merbau and Walnut, which have a 21mm thickness, a 6mm wear layer and a 189mm width.








- Arundel Plank
- Type of floor Real Wood Engineered
- Thickness 22mm (wear layer 7mm)
- Length x Width 400-2000mm x 180mm
(80% are 1800mm+length) - Pack Size Order by m2 + 5%
- Type of finish Unfinished, hardwax oil or lacquered
- Grade Select
- Type of joint Tongue and groove
- Bevels on edges With or without
- Method of fixing Floated, nailed or stuck down
- Underfloor heating Please enquire
- Hardness / Durability Dependent on species
Contact us now to order a sample by post, just let us have your full postal address...





